Paper cup raw material, by the container.
Cupstock in 1 PE and 2 PE, printed rolls, die-cut fans and bottom reels — made at our own plant in Indore and packed for export. If you run cup forming machines, this is the stock that feeds them.
CUPSTOCK SPECIFICATION
- Base paper
- 140–350 gsm
- PE coating
- 1 PE or 2 PE, 10–22 gsm
- Reel width
- 550–1120 mm
- Core
- 76 mm (3 inch)
- Roll weight
- up to 700 kg
- Capacity
- 250 tonnes a month
- Lead time
- 10–25 days
What feeds a cup line
Cupstock, fans and bottom reels — the bulk of what leaves our plant. Nothing is priced here; we quote against your volume, GSM and destination port.
How it behaves on your line
Cupstock is judged on the machine, not in the sample envelope. This is what ours is built to do.
High bond strength
The PE is bonded to hold through forming and sealing, so the rim and seam stay closed rather than delaminating under heat.
Accurate width and thickness
Consistent slitting and caliper keep web tension even, which is what stops drift and stoppages on a fast line.
Smooth feeding, minimal rejection
Fans are die-cut to accurate dimensions so they feed cleanly and waste stays low across a long run.
Strong bottom sealing
Bottom reels are made for high-speed compatibility and a sealed base that does not weep at the seam.
Excellent printability
The coated surface takes flexographic printing with food-grade water-based inks, holding sharp registration across the reel.
Made to your order
Nothing is held as fixed stock. GSM, coating weight, 1 PE or 2 PE, and reel width are set by your machine, not by our warehouse.
What our line can run
If these numbers fit your forming machines, the rest is a conversation about volume and price. If they do not, tell us what you need and we will say plainly whether we can do it.
| Parameter | Range | Notes |
|---|---|---|
| Base paper | 140 to 350 gsm | Food-grade board from established mills |
| PE coating | 10 to 22 gsm | 100% virgin food-grade granules, coated to your requirement |
| Coating sides | 1 PE or 2 PE | Single or double side, as your application needs |
| Reel width | 550 to 1120 mm | Slit to the width your machines run |
| Core diameter | 76 mm (3 inch) | Standard on all rolls |
| Roll weight | 500 to 700 kg | Maximum per roll |
| Monthly capacity | 250 tonnes | Coating output from the Betma plant |
| Lead time | 10 to 25 days | From confirmed order to dispatch, depending on volume and print |
Printing is flexographic with food-grade water-based inks. Blanks are die-cut from the same stock, to any of the cup sizes below or to a size you specify.
Nine sizes, five constructions
The same coated stock, formed and printed in our own plant. 85 ml through 300 ml, plus 7 oz to 12 oz in double wall. Every size below is also available as a die-cut blank.
Drawn to actual scale
Tap a size to filter the cupsThe 85 ml is not the usual 85 ml
Most 85 ml cups in the market are short and feel cheap in the hand. Ours is the long format — what the trade calls a 100 ml long — on heavier board, with a proper grip. Packed 50 to a sleeve.
Heavier board on the big sizes
The 250 ml runs on 230 gsm and the 300 ml on 250 gsm, so a full cold drink does not go soft at the rim. Four printed designs are stocked on the 300 ml.
Plain white cup dimensions
Measured at the rim, the base and overall height. Useful if you are matching an existing lid, sleeve or vending machine.
| Capacity | Top dia. | Bottom dia. | Height | Typical use |
|---|
Full capacity range across the catalogue: 85 ml, 100 ml, 130 ml, 150 ml, 200 ml, 250 ml, 300 ml, plus 7 oz, 8 oz and 12 oz in double wall. Ice cream cups in 50 ml and 100 ml.
Seven stages, one roof
Because every stage happens in our own facility, a quality problem at any step is ours to fix — not passed between three vendors.
Packaging, redefined
Established in 2022, Packedge manufactures premium paper cups and paper cup blanks for hotels, cafés, restaurants, tea chains, caterers, cloud kitchens, ice cream parlours, distributors and wholesalers. Every cup uses 100% virgin food-grade PE coating and food-grade water-based inks, so it is safe for hot and cold beverages alike.
Why it matters that we own the whole line
Most cup suppliers buy blanks from one vendor, print at another and form at a third. When a batch leaks or the print drifts, nobody owns the problem. We run every stage ourselves, so a fault is traced and fixed in one place — and repeat orders come out matching the first one.
Year established
Manufacturing facility at Betma, Indore (M.P.)
Coating output every month
Confirmed order to dispatch
Supply and dispatch network
Paper rolls, blanks, bottom reels and finished cups
Test it on your own machine first
No converter buys a container on a specification sheet. Tell us the GSM, coating and reel width you run, and we will send a sample reel or a pack of blanks cut to your cup size. You run it, you see the rejection rate, then we talk about volume.
You send GSM, coating, reel width and cup size.
We cut and dispatch the sample, with the datasheet.
You run it and tell us what the machine did.
We quote against your container volume and port.
Cup stock, made to order in India
Our raw material is made for converters who buy by the container rather than the carton. Send us your GSM, reel width and destination port, and we will price it.
Made to your specification
Anything from 140 to 350 gsm, coated and slit to the reel width your forming machines run. Blanks are die-cut to your cup size. Nothing is held as fixed stock, so the run is built around your order.
Container quantities
Rolls and blanks are palletised and shrink-wrapped for sea freight. We price per 20 ft and 40 ft container once we know your reel width and roll diameter. The plant coats 250 tonnes a month, so a standing monthly container is well within the line.
Our nearest port
Mundra is the closest container gateway to our plant at Betma, with Nhava Sheva as the alternative. Inland haulage is arranged from the factory gate.
Terms and documents
Ex-works and FOB pricing on request, with CFR and CIF quoted through our freight forwarder. Commercial invoice, packing list, certificate of origin and a food-grade declaration go with each consignment.
Enquiries welcome from
Somewhere else? Ask anyway — if a container can reach your port, we will quote it.
The full printed catalogue
Every product, every size, with specifications — the same brochure our sales team carries.
Send us your requirement
Add products above, fill in your details, and the enquiry opens in WhatsApp ready to send. Export buyers: give us GSM, reel width and destination port and we will come back with a landed price.
Your list
Nothing added yet. Choose a size on any product and press “Add to enquiry”.
Your details
Prefer email? Write to info@packedgeindia.com or call +91 99261 78710.